Skip to main content
Line 6 Cable Cable Adapter
Line 6 Cable Cable Adapter
Cable Adapter Range
Cable Adapter Range
Mini Jack Cable Adapter
Mini Jack Cable Adapter
Reverse Polarity Cable Adapter
Reverse Polarity Cable Adapter
2.1mm to 2.5mm Cable Adapter
2.1mm to 2.5mm Cable Adapter
Cable Adapter Range
Line 6 Cable Cable Adapter
Mini Jack Cable Adapter
Reverse Polarity Cable Adapter
2.1mm to 2.5mm Cable Adapter

Cable Adapters

£6.00
Tax included.
Tax included for UK only. Ex VAT price displayed for all other shipping destinations

We have a selection of cable adapters available, you can choose from...

  1. LINE 6 CABLE ADAPTER* - (2.1mm to 2.5mm, Reverse polarity)
  2. MINI JACK CABLE ADAPTOR
  3. REVERSE POLARTITY 2.1mm CABLE ADAPTER
  4. 2.1mm to 2.5mm CABLE ADAPTER

See the Key Features section below for more information about each type of cable.

*WARNING - THE LINE 6 CABLE ADAPTOR WILL NOT WORK WITH THE LINE 6 HX EFFECTS, AS THE UNIT IS CENTER NEGATIVE, Please select the 2.1mm to 2.5mm adapter for this pedal*

1. LINE 6 CABLE ADAPTER - (2.1mm to 2.5mm, Reverse polarity)

  • If you use a DL4 or any other LINE6 modelling pedal in this range the LINE 6 Adapter will allow you to run it from your Generator. 
  • All you need to do is put this adapter on the end of one of your Distributor cables and plug it in to your Line 6 modelling pedal or Digitech RP100 series pedal and your good to go.

*WARNING - THE LINE 6 CABLE ADAPTOR WILL NOT WORK WITH THE LINE 6 HX EFFECTS, AS THE UNIT IS CENTER NEGATIVE.

Please select the 2.1mm to 2.5mm adapter for this pedal*

2. MINI JACK CABLE ADAPTOR

  • If you use a pedal that requires a Mini Jack d.c. input then this is the answer. 
  • Just pop it on the end of one of the Distributor cables if you're using a TS-808, or on the end of one of our adapters if you need it for something a bit special. 
  • If you are using an old 18V Electric Mistress for example, just put it on the end of one of our Doubler 9-18V adapters and plug straight into the Mistress.

3. REVERSE POLARTITY 2.1mm CABLE ADAPTER

  • A simple 2.1mm reverse polarity adapter, so if it goes in centre negative, it comes out centre positive.
  • Useful with a Virtual Battery to power some positive ground effects that need to be isolated.
  • Due to problems with supplier, adaptor may appear different in appearance from the item pictured above.

42.1mm to 2.5mm CABLE ADAPTER

Some pedals use a 2.5mm d.c. input opposed to a normal BOSS style 2.1mm. 

See Key Features

The GigRig warrants the product to be free from defects in material and workmanship for a period of 2 years from the original date of purchase.

If the product fails within the warranty period, The GigRig will repair or, at our discretion, replace the product and cover the cost of return shipping to the original purchaser.

This warranty covers defects in manufacturing discovered while using this product as recommended by The GigRig.

This warranty does not cover loss or theft, nor does the coverage extend to damage caused by misuse, abuse, unauthorized modification, improper storage, lightning, or natural disasters.

Damage caused by any of the above circumstances may result in a non-warranty repair fee.

Legal: In the case of malfunction, the purchaser’s sole recourse shall be repair or replacement, as described in the preceding paragraphs. The GigRig will not be held liable to any party for damages that result from the failure of this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, damage to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. In no event will The GigRig be liable for more than the amount of the purchase price, not to exceed the current retail price of the product. The GigRig disclaims any other warranties, express or implied. By using the product, the user accepts all terms herein.

Recently viewed