High Current Power Adapter

Description
Warranty Information

Once you have TheGigRig Generator, the heart of our Modular Power Supply System, our High Current Adapters are the next step in creating your perfect power for your board.

The GigRig High Current Adaptors are:

1. TIMELORD

The GigRig TIMELORD is an adapter that as been designed to deliver all the juice your Strymon pedals need to operate at their best. The TIMELORD works as part of TheGigRig Effects Modular Power Supply which gives you unsurpassed amounts of power and configurations, delivering the most flexible professional effects power supply solution on the planet. The TIMELORD is also the perfect source to deliver clean, isolated power to your Whammy 5.

Technical

POWER - 9v in / 9v 550 mA Isolated out

PLUG - 2.1mm Centre Neg

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

2. SUPA-NOVA

There are loads of pedals out there now that require a higher than normal 9V DC voltage; TRex Replica, the Empress SuperDelay, Providence Chrono Delay, just to name a few. If you own a T.C. Electronics Nova Delay or any of the Nova series then the SupaNova is for you. Want to run your AnalogMan chorus at 12V? Then just pop this adapter on the end of Distributor powered by your Generator and the pedal will be receiving 12V DC.
Still unsure if you need a Supanova? Order a Custom Power Path Diagram from The GigRig Store.

Technical

POWER - 9v in/ 12v 550 mA out

PLUG - 2.1mm Centre Neg

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

3. DOUBLER

The ultimate 9-18V DC adapter is only a click away! Power your Electric Mistress or old Ibanez AD80 directly from the Generator. Run your Fulltone Full Drive II at 18V for more headroom, any pedal that takes 18V DC and the Doubler is for you. TheGigRig 9-18V Adapter will provide a clean supply and isolate the pedal it supplies, from all the other pedals, in exactly the same way as using the pedals own wall power supply. What’s more the 9-18V adapter will provide reverse isolation, so cross-talk between its dedicated pedal and other pedals is eliminated.

Technical

POWER - 9v in/ 18v 300 mA out

PLUG - 2.1mm Centre Neg

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

4. EL PASO

15V DC pedals have always been a pain to power but now thanks to the El Paso, it's as easy as sticking this on the end of Distributor and plugging this straight into your pedal. The Hiwatt Custom Tape echo is a perfect example, you no longer need a separate (or appropriately named) wall wart, just use the El Paso as part of TheGigRig Modular Power Supply System. Problem solved.

Technical

POWER - 9v in/ 15v 400mA out

PLUG - 2.1mm Centre Pos

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

5. EVENFLO

TheGigRig Evenflo is an adapter that as been designed to deliver all the juice that your Eventide stompbox series of pedal's need to operate at their best. The Evenflo works as part of TheGigRig Effects Modular Power Supply which gives you unsurpassed amounts of power and configurations, delivering the most flexible professional effects power supply solution on the planet. The Evenflo is also perfect for your LINE6 DL4, FM4, MM4 and ML4 pedals.

Technical

POWER - 9v in / 9v 550 mA Isolated, Reverse Polarity out

PLUG - 2.5mm Centre Pos

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

6.ELECTROMAN

If you love your Memory Man but the wall wart gets you down, your prayers have been answered. Our wonderful ElectroMan 9-24V DC adapter simply plugs on to the end of a Distributor cable being powered by the Generator. Ideal for use with 24V DC Electro Harmonix pedals, Diamond Memory Lane and any other pedal that requires an isolated 24V DC supply with 2.5mm centre positive input. TheGigRig 9-24V adapter will provide a clean supply and isolate the pedal it supplies from all the other pedals in exactly the same way as using the pedals own wall power supply. What’s more, the 9-24V adapter will provide reverse isolation, so crosstalk between its-self and other pedals will be eliminated.

Technical

POWER - 9v in/ 24v 300 mA Reverse polarity out

PLUG - 2.5mm Centre Pos

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

The GigRig warrants the product to be free from defects in material and workmanship for a period of 2 years from the original date of purchase. If the product fails within the warranty period, The GigRig will repair or, at our discretion, replace the product and cover the cost of return shipping to the original purchaser. This warranty covers defects in manufacturing discovered while using this product as recommended by The GigRig. This warranty does not cover loss or theft, nor does the coverage extend to damage caused by misuse, abuse, unauthorized modification, improper storage, lightning, or natural disasters. Damage caused by any of the above circumstances may result in a non-warranty repair fee. Legal: In the case of malfunction, the purchaser’s sole recourse shall be repair or replacement, as described in the preceding paragraphs. The GigRig will not be held liable to any party for damages that result from the failure of this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, damage to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. In no event will The GigRig be liable for more than the amount of the purchase price, not to exceed the current retail price of the product. The GigRig disclaims any other warranties, express or implied. By using the product, the user accepts all terms herein.

28 Reviews Hide Reviews Show Reviews

5
Timelord for MD-200

Posted by Neill Tupman on 2nd Mar 2021

Didn't know my Boss MD-200 would need one of these, but glad I got it as I'm sure I would have faced issued if I'd just wired it up to an Isolator. Thanks to Gigrig for explaining why it was needed after doing my custom power path PDF.
5
HIGH CURRENT ADAPTER

Posted by Phil Newham on 24th Nov 2020

I bought this to run my Dunlop Echoplex, it does that very well, another quality product from the GigRig.
5
18 V adapter

Posted by Phil Newham on 24th Nov 2020

Excellent unit, so many pedals these days can take these higher voltages and the results can be inspiring, an essential piece of kit for a modern pedalboard.
5
18 V adapter

Posted by Phil Newham on 24th Nov 2020

Excellent , I'm able to run my Fulltone OCD at 18 volts and it's a very different beast indeed.
5
Time lord

Posted by James Snell on 15th Oct 2020

2 time lords on my board make my 2 power hungry source audio pedals sound so much clearer. I was previously running them them through 2 500ma outputs but that caused a power slippage from my other power outputs. I could tell the pedals were struggling for head room.

Not any more. Awesome !!
5
Timelord

Posted by Tim H. on 3rd Sep 2020

Got a Timelord to power my Strymon Timeline. Like all the GigRig kit, it's really nicely made, easy to install, and results in a noiseless pedal. Great service and great products.
5
Finally power for my Tonebone Bassbone

Posted by J-F on 19th Jun 2020

Awesome solution! It fits within the modular GigRig system and I finally have the option to power my Tonebone Bassbone (15 V center positive, 400 mA) without having to use an additional wall adapter. Most other power solutions do not have that option, and if they do, they don't have the right number of outputs for the rest of my pedals.
5
Quality bit of kit

Posted by Mark on 11th Jun 2020

Great product, great service, will definitely stick with Dan’s company. A great guy