High Current Power Adapter

Description
Warranty Information

Once you have TheGigRig Generator, the heart of our Modular Power Supply System, our High Current Adapters are the next step in creating your perfect power for your board.

The GigRig High Current Adaptors are:

1. TIMELORD

The GigRig TIMELORD is an adapter that as been designed to deliver all the juice your Strymon pedals need to operate at their best. The TIMELORD works as part of TheGigRig Effects Modular Power Supply which gives you unsurpassed amounts of power and configurations, delivering the most flexible professional effects power supply solution on the planet. The TIMELORD is also the perfect source to deliver clean, isolated power to your Whammy 5.

Technical

POWER - 9v in / 9v 550 mA Isolated out

PLUG - 2.1mm Centre Neg

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

2. SUPA-NOVA

There are loads of pedals out there now that require a higher than normal 9V DC voltage; TRex Replica, the Empress SuperDelay, Providence Chrono Delay, just to name a few. If you own a T.C. Electronics Nova Delay or any of the Nova series then the SupaNova is for you. Want to run your AnalogMan chorus at 12V? Then just pop this adapter on the end of Distributor powered by your Generator and the pedal will be receiving 12V DC.
Still unsure if you need a Supanova? Order a Custom Power Path Diagram from The GigRig Store.

Technical

POWER - 9v in/ 12v 550 mA out

PLUG - 2.1mm Centre Neg

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

3. DOUBLER

The ultimate 9-18V DC adapter is only a click away! Power your Electric Mistress or old Ibanez AD80 directly from the Generator. Run your Fulltone Full Drive II at 18V for more headroom, any pedal that takes 18V DC and the Doubler is for you. TheGigRig 9-18V Adapter will provide a clean supply and isolate the pedal it supplies, from all the other pedals, in exactly the same way as using the pedals own wall power supply. What’s more the 9-18V adapter will provide reverse isolation, so cross-talk between its dedicated pedal and other pedals is eliminated.

Technical

POWER - 9v in/ 18v 300 mA out

PLUG - 2.1mm Centre Neg

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

4. EL PASO

15V DC pedals have always been a pain to power but now thanks to the El Paso, it's as easy as sticking this on the end of Distributor and plugging this straight into your pedal. The Hiwatt Custom Tape echo is a perfect example, you no longer need a separate (or appropriately named) wall wart, just use the El Paso as part of TheGigRig Modular Power Supply System. Problem solved.

Technical

POWER - 9v in/ 15v 400mA out

PLUG - 2.1mm Centre Pos

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

5. EVENFLO

TheGigRig Evenflo is an adapter that as been designed to deliver all the juice that your Eventide stompbox series of pedal's need to operate at their best. The Evenflo works as part of TheGigRig Effects Modular Power Supply which gives you unsurpassed amounts of power and configurations, delivering the most flexible professional effects power supply solution on the planet. The Evenflo is also perfect for your LINE6 DL4, FM4, MM4 and ML4 pedals.

Technical

POWER - 9v in / 9v 550 mA Isolated, Reverse Polarity out

PLUG - 2.5mm Centre Pos

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

6.ELECTROMAN

If you love your Memory Man but the wall wart gets you down, your prayers have been answered. Our wonderful ElectroMan 9-24V DC adapter simply plugs on to the end of a Distributor cable being powered by the Generator. Ideal for use with 24V DC Electro Harmonix pedals, Diamond Memory Lane and any other pedal that requires an isolated 24V DC supply with 2.5mm centre positive input. TheGigRig 9-24V adapter will provide a clean supply and isolate the pedal it supplies from all the other pedals in exactly the same way as using the pedals own wall power supply. What’s more, the 9-24V adapter will provide reverse isolation, so crosstalk between its-self and other pedals will be eliminated.

Technical

POWER - 9v in/ 24v 300 mA Reverse polarity out

PLUG - 2.5mm Centre Pos

WEIGHT - 0.05kg / 0.1lbs

DIMENSIONS - 8cm x 2cm x 4cm / 3.15" x 0.79" x 1.57"

The GigRig warrants the product to be free from defects in material and workmanship for a period of 2 years from the original date of purchase. If the product fails within the warranty period, The GigRig will repair or, at our discretion, replace the product and cover the cost of return shipping to the original purchaser. This warranty covers defects in manufacturing discovered while using this product as recommended by The GigRig. This warranty does not cover loss or theft, nor does the coverage extend to damage caused by misuse, abuse, unauthorized modification, improper storage, lightning, or natural disasters. Damage caused by any of the above circumstances may result in a non-warranty repair fee. Legal: In the case of malfunction, the purchaser’s sole recourse shall be repair or replacement, as described in the preceding paragraphs. The GigRig will not be held liable to any party for damages that result from the failure of this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, damage to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. In no event will The GigRig be liable for more than the amount of the purchase price, not to exceed the current retail price of the product. The GigRig disclaims any other warranties, express or implied. By using the product, the user accepts all terms herein.

23 Reviews Hide Reviews Show Reviews

5
Eoghan Byrne

Posted by Eoghan Byrne on 25th Mar 2019

Does the job, no noise and easy to set up
5
supa-nova

Posted by Jarno Stålhane on 7th Feb 2019

solved my noise issues with my tc novadelay! as always, high quality stuff.
5
Hign Power Adapter

Posted by Simon on 26th Dec 2018

To be honest, none of the GigRig stuff needs a review; it’s all top quality, excellent kit at decent prices. You’ll never go wrong! Buy Gigrig and do it right.
5
doubler

Posted by Simon on 22nd Oct 2018

Fantastic product (as are ALL GigRig products). I used this for my Cali 76 and it made a world of difference.
Also, the guys at GigRig give a FANTASTIC service; you're never alone! Cheers.
5
Evenflow

Posted by Neil on 17th Sep 2018

My boards are powered exclusively by GigRig products. It’s the best there is.
5
Timelord Adapter

Posted by Ben Gothard on 8th Aug 2018

Does exactly what it is supposed to do and does it flawlessly.
Small enough to not take up too much room on under the board with enough cable to make positioning it nice and easy.
5
Evenflo; a must for any H9 owner

Posted by Ben on 26th Mar 2018

I'm only a "bedroom"/hobby player. After changing my rig from a Marshall half stack to an Atomic Amplifire I was looking for one power supply capable of feeding my whole board (Amplifire, H9, and eight stomp boxes so far). I had my "ideal rig" checked through their power path diagram service to make sure it wasn't over the unit's limit, came back all good. I sold my original, 1st generation Voodoo Lab Pedal Power and ordered the BP1, two isolators, and a high current adaptor to start with. Setup was easy, but took a while as I cable tied everything for the first time ever! My rig now runs off two plugs (one for the generator and one for my Laney FRFR speaker) with room to run two more cables off the distributor to other distributors/isolators/high current adaptors when I buy more pedals. Highly recommended for any type of rig!
5
Timelord

Posted by Steve on 9th Mar 2018

Works great with the rest of my gigrig modular power.